8BIT FLASH MCU, 18F1320, DIP18, Series: PIC18F, Memory Size, Flash:8KB, EEPROM Size:256Byte, Memory Size, RAM:256Byte, I/O lines, No. of:16, ADC Inputs, No. of:7, Timers, No. of:4, PWM Channels, No of:4, Frequency, Clock:40MHz, Interface Type: EUSART, Voltage, Supply Min:4.2V, Voltage, Supply Max:5.5V, Termination Type: Through Hole, Case Style: DIP, Pins, No. of:18, Temperature, Operating Range:-40°C to +85°C, Temp, Op. Max:85°C, Temp, Op. Min:-40°C, Base Number:18, Bits, No. of:8, Bits, Number In Timer:16, Bits, Number in ADC:10, IC Generic Number:18F1320, Logic Function Number:18F1320, MIPS, No. of:10, Memory Size:4KB, Memory Type: FLASH, Microprocessor/Controller Features: ADC, BOR, PWM, TIMERS, USART, WDT, RAM Size:256Byte, Temperature Range, IC: Industrial
2720 Руб.
8BIT FLASH MCU, 12F675, DIP8, Series: PIC12F, Memory Size, Flash:1.75KB, EEPROM Size:128Byte, Memory Size, RAM:64Byte, I/O lines, No. of:6, ADC Inputs, No. of:4, Timers, No. of:1, Frequency, Clock:20MHz, Voltage, Supply Min:2V, Voltage, Supply Max:5.5V, Termination Type: Through Hole, Case Style: DIP, Pins, No. of:6, Temperature, Operating Range:-40°C to +85°C, Temp, Op. Max:85°C, Temp, Op. Min:-40°C, Base Number:12, Bits, No. of:8, Bits, Number In Timer:8, Bits, Number in ADC:10, IC Generic Number:12F675, Logic Function Number:12F675, Memory Configuration:1024 x 14, Memory Size:1024 x 14, Memory Type: FLASH, Microprocessor/Controller Features: ISP, WDT, RAM Size:64Byte, Temperature Range, IC: Industrial
768 Руб.
8BIT FLASH MCU, 18F4550, DIP40, Series: PIC18F, Memory Size, Flash:32KB, EEPROM Size:256Byte, Memory Size, RAM:2048Byte, I/O lines, No. of:35, ADC Inputs, No. of:13, Timers, No. of:4, PWM Channels, No of:5, Frequency, Clock:48MHz, Interface Type: EUSART, I2C, SPI, SPP, USB, Voltage, Supply Min:4.2V, Voltage, Supply Max:5.5V, Termination Type: Through Hole, Case Style: DIP, Pins, No. of:40, Temperature, Operating Range:-40°C to +85°C, Temp, Op. Max:85°C, Temp, Op. Min:-40°C, Base Number:18, Bits, No. of:8, Bits, Number In Timer:16, Bits, Number in ADC:10, IC Generic Number:18F4550, Interrupts, Internal No. of:20, Logic Function Number:18F4550, Memory Size:32K, Memory Type: FLASH, Microprocessor/Controller Features: SPI, I? C, CCP, ECCP, SPP, EUSART, 2 x Comparators, 1 x 8-bit timer, 3 x 16-bit timer, Temperature Range, IC: Industrial, Frequency, Operating:48Hz
3133 Руб.
8BIT FLASH MCU, 16F819, DIP18, Series: PIC16F, Memory Size, Flash:3.5KB, EEPROM Size:256Byte, Memory Size, RAM:256Byte, I/O lines, No. of:16, ADC Inputs, No. of:5, Timers, No. of:3, PWM Channels, No of:1, Frequency, Clock:20MHz, Interface Type: I2C, SPI, Voltage, Supply Min:4V, Voltage, Supply Max:5.5V, Termination Type: Through Hole, Case Style: DIP, Pins, No. of:18, Temperature, Operating Range:-40°C to +85°C, Temp, Op. Max:85°C, Temp, Op. Min:-40°C, Base Number:16, Bits, No. of:8, Bits, Number In Timer:16, Bits, Number in ADC:10, IC Generic Number:16F819, Logic Function Number:16F819, Memory Size:2KB, Memory Type: FLASH, Microprocessor/Controller Features: ADC, BOR, ICSP, INTERNAL RC, PWM, SPI, WDT, RAM Size:256Byte, Temperature Range, IC: Industrial
2400 Руб.
8BIT FLASH MCU, 16F873, SDIL28, Series: PIC16F, Memory Size, Flash:7KB, EEPROM Size:128Byte, Memory Size, RAM:192Byte, I/O lines, No. of:22, ADC Inputs, No. of:5, Timers, No. of:1, PWM Channels, No of:2, Frequency, Clock:4MHz, Interface Type: I2C, SPI, USART, Voltage, Supply Min:4V, Voltage, Supply Max:5.5V, Termination Type: Through Hole, Case Style: SDIL, Pins, No. of:28, Temperature, Operating Range:-40°C to +85°C, Temp, Op. Max:85°C, Temp, Op. Min:-40°C, Base Number:16, Bits, No. of:8, IC Generic Number:16F873, Logic Function Number:16F873, Memory Configuration:4096x14, Memory Size:4KB, Memory Type: FLASH, Microprocessor/Controller Features:2 PWM, Brown- Out Detection, Watchdog , In-System Programming, Temperature Range, IC: Industrial
2848 Руб.
8BIT FLASH MCU, 16F870, SDIL28, Series: PIC16F, Memory Size, Flash:3.5KB, EEPROM Size:64Byte, Memory Size, RAM:128Byte, I/O lines, No. of:22, ADC Inputs, No. of:5, Timers, No. of:3, PWM Channels, No of:1, Frequency, Clock:20MHz, Interface Type: USART, Voltage, Supply Min:4V, Voltage, Supply Max:5.5V, Termination Type: Through Hole, Case Style: SDIL, Pins, No. of:28, Temperature, Operating Range:-40°C to +85°C, Temp, Op. Max:85°C, Temp, Op. Min:-40°C, Base Number:16, Bits, No. of:8, Bits, Number in ADC:10, IC Generic Number:16F870, Logic Function Number:16F870, Memory Size:2KB, Memory Type: EEPROM, Microprocessor/Controller Features: One Capture, Compare, PWM, USART, Parallel Slave Port, Brown-out detection, Watchdog, Temperature Range, IC: Industrial
3168 Руб.
IC, PWM SWITCH, TUBE50, Power Supply Type: Off-Line PWM Switch, Voltage, Input Max:265V ac, Current, Output Max:100mA, Outputs, No. of:1, Frequency:100kHz, Voltage, Supply Min:36V, Termination Type: Through Hole, Case Style: TO-220, Pins, No. of:3, Temperature, Operating Range:-40°C to +150°C, Temp, Op. Max:150°C, Temp, Op. Min:-40°C, Base Number:223, IC Generic Number:223, Packaging Type: Tube, Voltage, Output:700V
928 Руб.
Наборы для измерения резьбы ASIMETO Диапазон измерения Угол при верш. Число пластин Набор пластин Арт. 0,25 - 2,5 мм 60° 28 шт. 0,25 - 0,90 мм с шагом 0,05 мм , 1 - 2 мм с шагом 0,1 мм ; 1,25; 1,75; 2,5 мм 605-50-0 0,35 - 6 мм 60° 22 шт. 0,35; 0,4; 0,45; 0,5; 0,6; 0,7; 0,75; 0,8; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6 мм 605-51-0 0,4 - 7 мм 60° 21 шт. 0,4; 0,5; 0,7; 0,75; 0,8; 0,9; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 605-52-0 0,4 - 7 мм 60° 18 шт. 0,4; 0,5; 0,75; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 605-53-0 4 - 42 TPI 60° 30 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-2 4 - 84 TPI 60° 51 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30 - 84 с шагом 2 , TPI 605-51-2 0,4 - 7 мм; 4 - 42 TPI 60° 51 шт. 0,4; 0,5; 0,7; 0,75; 0,8; 0,9; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-8 0,5 - 6 мм; 4 - 56 TPI 60° 28 шт. 0,5; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6 мм 4; 6; 7; 8; 10; 11; 11 1/2; 12; 13; 16; 20; 28; 32 TPI 605-51-8 4 - 42 TPI 55° 30 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-5 4 - 60 TPI 55° 28 шт. 4; 4 1/2; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 16; 18; 20; 22; 24; 25; 26; 28; 30; 32; 34; 36; 40; 48; 60 TPI 605-51-5
1300 Руб.
Наборы для измерения резьбы ASIMETO Диапазон измерения Угол при верш. Число пластин Набор пластин Арт. 0,25 - 2,5 мм 60° 28 шт. 0,25 - 0,90 мм с шагом 0,05 мм , 1 - 2 мм с шагом 0,1 мм ; 1,25; 1,75; 2,5 мм 605-50-0 0,35 - 6 мм 60° 22 шт. 0,35; 0,4; 0,45; 0,5; 0,6; 0,7; 0,75; 0,8; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6 мм 605-51-0 0,4 - 7 мм 60° 21 шт. 0,4; 0,5; 0,7; 0,75; 0,8; 0,9; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 605-52-0 0,4 - 7 мм 60° 18 шт. 0,4; 0,5; 0,75; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 605-53-0 4 - 42 TPI 60° 30 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-2 4 - 84 TPI 60° 51 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30 - 84 с шагом 2 , TPI 605-51-2 0,4 - 7 мм; 4 - 42 TPI 60° 51 шт. 0,4; 0,5; 0,7; 0,75; 0,8; 0,9; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-8 0,5 - 6 мм; 4 - 56 TPI 60° 28 шт. 0,5; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6 мм 4; 6; 7; 8; 10; 11; 11 1/2; 12; 13; 16; 20; 28; 32 TPI 605-51-8 4 - 42 TPI 55° 30 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-5 4 - 60 TPI 55° 28 шт. 4; 4 1/2; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 16; 18; 20; 22; 24; 25; 26; 28; 30; 32; 34; 36; 40; 48; 60 TPI 605-51-5
1600 Руб.
Наборы для измерения резьбы ASIMETO Диапазон измерения Угол при верш. Число пластин Набор пластин Арт. 0,25 - 2,5 мм 60° 28 шт. 0,25 - 0,90 мм с шагом 0,05 мм , 1 - 2 мм с шагом 0,1 мм ; 1,25; 1,75; 2,5 мм 605-50-0 0,35 - 6 мм 60° 22 шт. 0,35; 0,4; 0,45; 0,5; 0,6; 0,7; 0,75; 0,8; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6 мм 605-51-0 0,4 - 7 мм 60° 21 шт. 0,4; 0,5; 0,7; 0,75; 0,8; 0,9; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 605-52-0 0,4 - 7 мм 60° 18 шт. 0,4; 0,5; 0,75; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 605-53-0 4 - 42 TPI 60° 30 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-2 4 - 84 TPI 60° 51 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30 - 84 с шагом 2 , TPI 605-51-2 0,4 - 7 мм; 4 - 42 TPI 60° 51 шт. 0,4; 0,5; 0,7; 0,75; 0,8; 0,9; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-8 0,5 - 6 мм; 4 - 56 TPI 60° 28 шт. 0,5; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6 мм 4; 6; 7; 8; 10; 11; 11 1/2; 12; 13; 16; 20; 28; 32 TPI 605-51-8 4 - 42 TPI 55° 30 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-5 4 - 60 TPI 55° 28 шт. 4; 4 1/2; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 16; 18; 20; 22; 24; 25; 26; 28; 30; 32; 34; 36; 40; 48; 60 TPI 605-51-5
1600 Руб.
Наборы для измерения резьбы ASIMETO Диапазон измерения Угол при верш. Число пластин Набор пластин Арт. 0,25 - 2,5 мм 60° 28 шт. 0,25 - 0,90 мм с шагом 0,05 мм , 1 - 2 мм с шагом 0,1 мм ; 1,25; 1,75; 2,5 мм 605-50-0 0,35 - 6 мм 60° 22 шт. 0,35; 0,4; 0,45; 0,5; 0,6; 0,7; 0,75; 0,8; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6 мм 605-51-0 0,4 - 7 мм 60° 21 шт. 0,4; 0,5; 0,7; 0,75; 0,8; 0,9; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 605-52-0 0,4 - 7 мм 60° 18 шт. 0,4; 0,5; 0,75; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 605-53-0 4 - 42 TPI 60° 30 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-2 4 - 84 TPI 60° 51 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30 - 84 с шагом 2 , TPI 605-51-2 0,4 - 7 мм; 4 - 42 TPI 60° 51 шт. 0,4; 0,5; 0,7; 0,75; 0,8; 0,9; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-8 0,5 - 6 мм; 4 - 56 TPI 60° 28 шт. 0,5; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6 мм 4; 6; 7; 8; 10; 11; 11 1/2; 12; 13; 16; 20; 28; 32 TPI 605-51-8 4 - 42 TPI 55° 30 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-5 4 - 60 TPI 55° 28 шт. 4; 4 1/2; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 16; 18; 20; 22; 24; 25; 26; 28; 30; 32; 34; 36; 40; 48; 60 TPI 605-51-5
1600 Руб.
Наборы для измерения резьбы ASIMETO Диапазон измерения Угол при верш. Число пластин Набор пластин Арт. 0,25 - 2,5 мм 60° 28 шт. 0,25 - 0,90 мм с шагом 0,05 мм , 1 - 2 мм с шагом 0,1 мм ; 1,25; 1,75; 2,5 мм 605-50-0 0,35 - 6 мм 60° 22 шт. 0,35; 0,4; 0,45; 0,5; 0,6; 0,7; 0,75; 0,8; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6 мм 605-51-0 0,4 - 7 мм 60° 21 шт. 0,4; 0,5; 0,7; 0,75; 0,8; 0,9; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 605-52-0 0,4 - 7 мм 60° 18 шт. 0,4; 0,5; 0,75; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 605-53-0 4 - 42 TPI 60° 30 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-2 4 - 84 TPI 60° 51 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30 - 84 с шагом 2 , TPI 605-51-2 0,4 - 7 мм; 4 - 42 TPI 60° 51 шт. 0,4; 0,5; 0,7; 0,75; 0,8; 0,9; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7 мм 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-8 0,5 - 6 мм; 4 - 56 TPI 60° 28 шт. 0,5; 1; 1,25; 1,5; 1,75; 2; 2,5; 3; 3,5; 4; 4,5; 5; 5,5; 6 мм 4; 6; 7; 8; 10; 11; 11 1/2; 12; 13; 16; 20; 28; 32 TPI 605-51-8 4 - 42 TPI 55° 30 шт. 4; 4 1/2; 5; 5 1/2; 6; 7; 8; 9; 10; 11; 11 1/2; 12; 13; 14; 15; 16; 18; 20; 22; 24; 26; 27; 28; 30; 32; 34; 36; 38; 40; 42 TPI 605-50-5 4 - 60 TPI 55° 28 шт. 4; 4 1/2; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14; 16; 18; 20; 22; 24; 25; 26; 28; 30; 32; 34; 36; 40; 48; 60 TPI 605-51-5
2000 Руб.
The Stanley Stapler Pins are apt for all the light-duty applications. Crafted from high quality plastic, these pins are exceptionally durable and long-lasting. These pins are also designed with a chisel point tip for better penetration. Type A and coming in a size of 6 mm, these pins are apt for light-duty staplers like TR40 and TR45. These stapler pins are easy to handle. Extremely sharp, they can be used to staple most of the items together quickly and efficiently. (1). Best suited for light-duty applications. (2). Type A and size of 6 mm. (3). Made from plastic. (4). Modeled with a chisel point tip for increased penetration. (5). Comes in a box and features 1000 pieces. (6). Easy to use and handle..
0 Руб.
DL180 Gen10 8 to 16 SFF Upgrade Kit (Box 2)
23971 Руб.
The Terminator brand brand 3 Way Universal Multi Adaptor, One Universal Socket & 2x2 Round Pin Sockets With Live Earth 13A Plug is a premium quality and durable electronic product for your home and office. This 3 Way Universal Multi Adaptor comes with one universal socket and 2 X 2 round pin sockets. It also features Live Earth and maximum rating of 13 A. It is made of highly durable and resilient plastic material that will lasts for year to come. .(1)Features One Universal Socket(2)Includes 2x2 Round Pin Sockets(3)Comes with Live Earth 13A Plug(4)Made of highly durable and resilient plastic material that will lasts for year to come. (5)3 Way Universal Multi Adaptor.
0 Руб.
